trace-moisture-analyzer-tm2000

trace-moisture-analyzer-tm2000  download


Designed to make the task of trace oxygen analysis easier, faster and more precise than ever before

  • Insta recovery advanced micro fuel cell sensor
  • Display gas concentration, units
  • Extensive self-diagnostic testing at start-up and on demand with continuous powersupply monitoring
  • Auto ranging capabilities
  • One high and one low alarm set point with corresponding relay contacts
  • Sensor failure alarm
  • Extended-life, maintenance-free sensor.one year warranty and an expected life of two years
  • 16x2-line alphanumeric display screen, continuously prompting and informing the operator
  • High resolution, accurate readings of oxygen content from low ppm levels through 25%.

Custom Engineering is Endee's main strength Endee maintains in-house capability to both design and manufacture a wide variety of sample systems tailored to meet out customers' process requirements. We design sample-conditioning systems for our complete line of process analyzers .

The trace oxygen analyser can be ordered as a standard unit or as part of a larger cost effective integerated analytical system. The analyser can also be supplied designed as a “split architecture” instrument, meaning that a general purpose, panel mounted Control Unit for non-hazardous areas controls a remote Analysis Unit(Transmitter) that can operate in hazardous areas.

Indication 16x2 Alpha numeric Digital LCD Continuous
Principle of Analysis Fast Recovery Self Powered Diffusion Limited sealed Electrochemical Sensor
Ranges 0 - 10, 0 - 100, 0 - 1000 ppm
Accuracy ±2% of full scale (±1ppm for 0 - 10ppm range) at a constant temperature
Diagnostics Comprehensive self testing function
Digital Interface RS-232C
Response Time 90% in 5 to 10 seconds 90% in 60 seconds (0 - 10 ppm range)
Reproducibility ±1% at a constant temperature
Sensitivity 0.5% of FS
Alarm Setting Hi & Very High Adjustable over full range
Wetted Parts 316 Stainless Steel / Teflon
Relative Humidity 0 - 99% RH Non-condensing
Housing Drawn Aluminium
Recommended Sample 0.1 to 5 Litre / Min
0 Operating Temperature 0 to 50 C
Power 110 or 220 V (user specified), 50/60 Hz
Analog Output 4 - 20 mA isolated output 600 ohms
Sample inlet / outlet 1/4” OD Flare fittings
Mounting Panel
Mounting Dimension 390 x 132 x 230 mm